Somat Model HE-9S Hydra-Extractor

	SOMAT Model HE-9S Hydra-Extractor
Remote Waste Pulping System	Technical Specifications
	Hydra-Extractor: Rigid stainless steel weldment with stainless steel legs, head assembly with 5 HP TEFC belt driven motor mounted to a 25:1 gear reducer, 28" long stainless steel discharge chute with limit switch, chemical additive pump, automatic rinse system. Water extracting mechanism consists of 9" diameter stainless steel screw with nylon brush edge, stainless steel adjustable gate and matching 9" diameter reinforced stainless steel screen. Valve Package: All valves required for proper operation (fresh water, tray flush and drain lines. Som-A-Trol (Electrical Control Panel): UL approved. Includes all necessary electrical components prewired to a terminal strip; water level control and push button station, in a NEMA 12 carbon steel enclosure
Description
Standard SOMAT Model HE-9S Hydra-Extractor with 5 HP drive motor, 5 - 7-1/2 HP return pump, chemical additive pump, valve package, automatic rinse system, Som-A-Trol control panel with water level control and discharge chute with limit switch. Benefits Up to 80% volume reduction Reduced labor cost Better sanitation Water conservation Improved operator morale Reduced silverware loss Processes a wide variety of waste Operation: Foodservice waste enters the pulping tank via the feed tray where it mixes with water, is processed and made into a slurry. The slurry, consisting of 5% solids and 95% water, is automatically transported through a pipeline to the Hydra-Extractor, where water is removed and the resultant semi-dry pulp is discharged into a haul-away container. The extracted water is recovered and returned to the pulping tank for re-use. Somat equipment provides an economic and efficient answer to cutting the high and ever increasing costs associated with waste handling. Manufactured by Somat Corporation of Coatsville, Pennsylvania, originators of waste pulping systems and specialist in waste reduction technology.	.Options Available: Extended Discharge Chute Hinged Chute Extended Stand NEMA 4 Stainless Steel Som-A-Trol Pulp Level Detector Special electrical characteristics Special Requirements: 10HP or larger return pump. Determined by piping conditions. Water Economizing Tank. Required when 10HP or larger return pump is used. Pulp Screw Conveyor and Controls. Required to convey pulp from discharge chute to haul-away container when location of container does not permit gravity discharge. Electrical Characteristics: 208/230/480 Volt, 3 Phase, 60 Hertz Capacity: 3,000 pounds per hour of foodservice waste mix, consisting of food scraps, plastics, milk cartons, paper, aluminum foil and cardboard. Finish: All Exterior surfaces, except where polished stainless steel, are prime coated and finished with two coats of enamel paint. Equipment only is supplied by SOMAT Corporation, installation, piping and wiring is not included.

Somat Model HE-9S Hydra-Extractor including:
1 Hydra-Extractor 2 Hydra-Extractor drive motor, 5 HP 3 Return pump & motor, 7-1/2 HP 4 Autorinse Spray System	5 Chemical additive pump 6 Discharge chute 28" Long with limit switch 7 Som-A-Trol panel (24"h x 20"w x 8"d) with push button station
Utility Connections:
8 Fresh Hot Water Inlet, 3/4" npt 9 Slurry Inlet, 4" npt 10 Return Pump Outlet, 3" flanged	11 Autorinse Drain, 1-1/2" npt (located on return piping assembly) 12 Customer power supply (4 wire service required)
Dimensions:
Height: 107" (2720 mm) Length: 69" (1750 mm) Width: 26" (660 mm)	Equipment Weight/Operating Weight: 1100 lbs/1270 lbs Crated Weight: 1200 lbs Crated Volume: 128 cu.ft.
Utility Requirements:
Fresh hot water, 18 gpm @ 45 psig, 3/4" npt (approximate usage 180 gph) Drain, 4" min. floor sink with stainless steel removable basket Power, 208V-40 amps: 230V-40 amps: 460V-20 amps, 3 phase, 60 hz. (disconnect with circuit breaker provided in Som-A-Trol)